At Fabricats Mimsa we mass-produce the silicone part of an airtight stopper for reusable glass bottles. It is a good example of our work in custom silicone parts: starting from the customer’s design, choosing the right material and producing thousands of identical parts with consistent quality.
The part: a wooden stopper with a silicone seal
The stopper combines a wooden body with a silicone part that covers it and actually seals the bottle. The silicone adapts to the glass neck and provides a completely leak-tight seal, with no drips even when the bottle is carried on its side in a bag.
The part also has a geometric relief on top that is part of the product’s identity. This relief must come out sharp and identical on every part, which requires a very precise mould and a well-controlled curing process.
Material: FDA-compliant platinum-cured silicone
As the part is in direct contact with drinking water, we use platinum-cured silicone compliant with FDA food-contact regulations.
- No odour or taste: platinum curing leaves no peroxide residues, so the silicone does not affect the taste of the water.
- High purity: it is the same type of silicone used for baby-bottle teats and dummies.
- Durability: it withstands frequent washing, hot water and thousands of opening and closing cycles without deforming.
60 Shore A hardness: the balance between sealing and firmness
We chose a hardness of 60 Shore A. A softer silicone would seal well but deform with use; a harder one would be difficult to fit and would not adapt to the small tolerances of glass. At 60 Shore A the stopper fits with comfortable pressure, seals well and keeps its shape over time.
Multi-cavity mould for series production
A custom multi-cavity steel mould was designed for this part, allowing large production runs at a competitive cost per part. The mould is owned by the customer and built by an accredited external mould maker we work with regularly. The part is produced by solid silicone (HTV) injection at our plant in Rubí (Barcelona, Spain).
Quality in every batch
All our parts are manufactured under an IATF 16949 and ISO 9001 certified quality system, the same one we apply to the parts we supply to the automotive industry. For this stopper we pay special attention to the definition of the relief, the absence of flash in the sealing area and the dimensions that ensure leak-tightness.
Need a custom silicone part?
We manufacture FDA-compliant platinum silicone parts for packaging, kitchenware, pet accessories, entrance mats and technical applications. From drawing approval to first samples it usually takes 4 to 6 weeks.
Ask us for a quote and tell us about your project.





